Textured G3.5 Replacement Scales

Replacement scales fit the Guardian 3.5 Drop Point, Tanto, and Sheepsfoot.

Ships with with new fasteners and two Spanner 4 bits.

We are aware some customers use our knives in extreme work conditions, so we try to make sure the scales are secure.  We torque the fasteners to 12 in.lbs; about hand tight. The fasteners have a fine thread, and some can be more difficult to remove than others.  When we remove them in the shop, we insert a bit in both sides and slowly apply pressure twisting the male fastener side.  The Right scale when looking down on the spine.  The process is shown in one of our videos on YouTube.  https://youtu.be/rTWrlYiorpc